I PULSE LG4-M8A00-010 SMT Feeder 44mm To SMT F1 PICK AND PLACE MACHINE

I-PULSE FEEDER LG4-M8A00-010 SMT PARTS 44mm to SMT F1 PICK AND PLACE MACHINE

Description:

Surface-mount technology (SMT) is a method in which the electrical components are mounted directly onto the surface of a printed circuit board (PCB). An electrical components mounted in this manner is referred to as a surface-mount device (SMD). In industry, this approach has largely replaced the through-hole technology construction method of fitting components, in large part because SMT allows for increased manufacturing automation. Both technologies can be used on the same board, with the through-hole technology often used for components not suitable for surface mounting such as large transformers and heat-sinked power semiconductors.

An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.

Specification:

Supply Ability:

Supply new and used I-Pulse feeders at lower price:

• I-PULSE M1 Z DDRIVER PY2A015A2
• I-PULSE M1 Z MOTOR P50BA2004DXS23
• I-PULSE F1 8x2 FEEDER LG4-M2A00-030
• I-PULSE F1 8x4 FEEDER LG4-M1A00-030
• I-PULSE F1 12MM FEEDER LG4-M4A00-012
• I-PULSE F1 12MM FEEDER LG4-M4A00-110
• I-PULSE F1 12MM FEEDER LG4-M4A00-X00
• I-PULSE F1 16MM FEEDER LG4-M5A00-020
• I-PULSE F1 24MM FEEDER LG4-M6A00-010
• I-PULSE F1 24MM FEEDER LG4-M6A00-020
• I-PULSE F1 24MM FEEDER
• I-PULSE F1 32MM FEEDER LG4-M7A00-000
• I-PULSE F1 32MM FEEDER LG4-M7A00-010
• I-PULSE F1 32MM FEEDER LG4-M7A00-030
• I-PULSE F1 32MM FEEDER
• I-PULSE PS 24MM FEEDER
• I-PULSE PS8x2 FEEDER
• I-PULSE PS8x4MM FEEDER
• I-PULSE STICK FEEDER

Related Details:

SMT Application:

Although it is possible to use some SMT components for home construction, great care is required when soldering them. Additionally even the ICs having a wide pin spacing may be difficult to solder.

Those with fifty or more pins cannot be soldered without special equipment. They are intended only for large scale manufacturing. Even when working on boards that have already been built great care is needed. However these SMT components offer great cost savings to manufacturers and this is why they have been adopted. Fortunately for the home constructor, traditional leaded components that can be soldered manually are still widely available and offer a much better solution for home construction.